|
INVERTERS
Xantrex/Trace Suntie Inverter
The UL listed, high frequency Sun Tie XR™
inverter is designed to be the link between your solar array and
the utility. This grid-tie inverter features Sunsweep™ maximum
power point tracking (MPPT), LCD user display, combined AC/DC surge
protection, and DC and AC input/output breaker. Using a standard
telephone cable, the optional remote meter allows you to scroll
through multiple screens, which display daily, weekly, monthly and
cumulative energy production, as well as other system performance
data. Complies with IEEE 929 standards for grid tie oper-ation.
UL listed to UL 1741 and cUL listed to CSA C22.2. Not designed for
use with batteries.
Features:
• User display shows system status and daily energy harvest
(Whr)
• Sine wave output 240 VAC, 60 Hz, single phase, high frequency
PWM controlled
• AC Disconnect - standard double-pole 15 amp, 240 VAC branch
rated circuit breaker
• DC Disconnect - standard single-pole 100 amp, DC rated circuit
breaker
• PV ground fault protection system
• PV combiner board with 6 fused inputs, 20 amps maximum per
input
• Lightning arrestor
New
Low Prices!
| Model |
Efficiency
(Peak)
|
DC Voltage
Input
|
Continuous
Power |
Dimensions |
Weight (lbs.) |
$US |
| STXR1000 |
92% |
48VDC |
1000 VA |
33.25"x13.25"x5.3" |
35 |
N/A |
| STXR1500 |
92%
|
48VDC |
1500 VA |
33.25"x13.25"x5.3" |
35 |
$1791 |
| STXR2000 |
94% |
48VDC |
2000 VA |
33.25"x13.25"x5.3" |
35 |
N/A |
| STXR2500 |
94% |
48VDC |
2500 VA |
33.25"x13.25"x5.3" |
35 |
$2207 |
| Suntie XR |
Accessories
|
$US |
| STRS |
Protective
rain shield, required for installation outdoors |
$99 |
| STRM |
Protective rain shield, required for installation outdoors
and daily energy harvest w/50 ft. cable
|
$143 |
Xantrex/Trace Suntie specs
EMAIL TO ORDER $75 Minimum
Go
to the Xantrex Suntie website
Xantrex/Trace Power Center
Power Panels are Trace’s first packaged power
system. They are less expensive than an on-site
component installation and meet many power application needs. To
install Power Panels, simply connect them to the battery, PV and
or AC loads. Power Panels include inverters and are assembled by
Trace with components specified by the customer.
Features include:
Trace Power Panel Series
• One or two Trace SW or DR inverters
• Powder coated steel back-plate pre-wired
with all NEC/UL requirements, AC & DC
over current protection and disconnects:
only for indoor installation
• Negative/ground bonding block
• Single or dual C40 charge controllers for
use DC charging sources
• Optional nonmetallic battery enclosure
which doubles as a shipping enclosure
• Flexible conduit for connection of the
system to the battery enclosure
• 60 amp AC system bypass that allows
inverter servicing while keeping AC loads
connected to the grid or generator
New
Low Prices!
| Model |
DC Voltage
Input
|
Continuous
Power |
Charger Current |
AC Volts Output |
Dimensions |
Wght
(lbs.) |
$US |
| SW5548/D |
48V |
11 KW |
70 A x 2 |
120/240 VAC
60Hz |
1" x 43"
x 40" |
290 |
$7,890 |
| SW5548/S |
48V |
5.5 KW |
70 A |
120VAC 60 Hz |
1" x 43"
x 40" |
248 |
$4,549 |
| SW4024/D |
24V |
8.0 KW |
120A x 2 |
120/240 VAC
60Hz |
1" x 43"
x 40" |
155 |
$6,946 |
| SW4024/S |
24V |
4.0 KW |
120 A |
120VAC 60 Hz |
1" x 43"
x 40" |
155 |
$3,946 |
| SW4048S |
48V |
4.0 KW |
60 A |
120VAC 60 Hz |
1" x 43"
x 40" |
217 |
$3,946 |
| SW4048D |
48V |
8.0 KW |
60 A x 2 |
120/240 VAC
60Hz |
1" x 43"
x 40" |
334 |
$6,953 |
| DR3624/S |
24V |
3.6 KW |
70 A |
120VAC 60 Hz |
1" x 43"
x 40" |
95 |
$1,997 |
| DR3624/D |
24V |
7.2 KW |
70 A x 2 |
120/240 VAC
60Hz |
1" x 43"
x 40" |
120 |
$3,836 |
| DR2424/S |
24V |
2.4 KW |
70 A |
120VAC 60 Hz |
1" x 43"
x 40" |
90 |
$1,836 |
| DR1524/S |
24V |
1.5 KW |
35 A |
120VAC 60 Hz |
1" x 43"
x 40" |
85 |
$1,499 |
Call or e-mail for pricing on Power Panel Options and Trace Accessories
EMAIL TO ORDER $75 Minimum
Xantrex/Trace Power Panel specs
Go
to the Xantrex Power Panel website
Back
to Inverters
|
