CHARGE CONTROLLERS
Prostar
ProStars intelligent
control and unique features significantly improve battery performance.
The ProStar features highly accurate set points, low voltage drops,
and sealed & flooded control parameters. ProStar provides higher charging
efficiency, increases the battery capacity, reduces water loss, and extends
the life of the battery. Five year limited warranty.
Features:
Low voltage disconnect
Operating temperatures of -40°C to +85°C
PWM battery charging
Automatic equalization of wet batteries
PG models are positive ground
Temperature compensation box, termination on bottom or top.
| Model |
Voltage |
Rated PV Current
(Amps) |
Rated Load Current
(Amps) |
Dimensions (inches)
|
Weight (oz.) |
$US |
| PS 15 |
12/24 |
15 |
15 |
6.01" X 4.14" |
12 |
$92 |
| PS15M w/meter |
12/24 |
15 |
15 |
6.01" X 4.14" |
12 |
$146 |
| PS 15M 48V |
48 |
15 |
15 |
6.01" X 4.14" |
12 |
$182 |
| PS15M 48V PG |
48 |
15 |
15 |
6.01" X 4.14" |
12 |
$195 |
| PS 30 |
12/24 |
30 |
30 |
6.01" X 4.14" |
12 |
$137 |
| PS 30M |
12/24 |
30 |
30 |
6.01" X 4.14" |
12 |
$197 |
| PS 30M PG |
12/24 |
30 |
30 |
6.01" X 4.14" |
12 |
$193 |
Morningstar-Sunsaver
SunSavers battery
charging design closely copies the ProStars advanced charging algorithm.
The series PWM algorithm is very stable, yet responds instantly to changing
conditions. The constant voltage PWM charging is a proven advancement
compared to the common on/off PV regulators. Five-year limited warranty.
L models include Low Voltage Disconnect.
Features:
True 0-100% PWM duty cycle
Field selectable for sealed or flooded battery
Temperature compensation
Series design for constant voltage charging
Pulse charging
Approved for use in hazardous
(Class 1, Div 2, groups A,B,C,D) locations
UL1604 listed and CSA 22.2 (Canada)
Operating temperatures of -40°C to +85°C
| Model |
Voltage |
Rated PV Current
(Amps) |
Rated Load Current
(Amps) |
Dimensions (inches)
|
Weight (oz.) |
$US |
| SS6-12 |
12 |
6.5 |
N/A |
6.0" X 2.2" |
8 |
$43 |
| SS6L-12 |
12 |
6.5 |
6.0 |
6.0" X 2.2" |
8 |
$53 |
| SS10-12 |
12 |
10 |
N/A |
6.0" X 2.2" |
8 |
$49 |
| SS10L-12 |
12 |
10 |
10 |
6.0" X 2.2" |
8 |
$63 |
| SS10-24 |
24 |
10 |
N/A |
6.0" X 2.2" |
8 |
$55 |
| SS10L-24 |
24 |
10 |
10 |
6.0" X 2.2" |
8 |
$69 |
| SS20L-12 |
12 |
20 |
20 |
6.0" X 2.2" |
8 |
$85 |
| SS20L-24 |
24 |
20 |
20 |
6.0" X 2.2" |
8 |
$91 |
Morningstar - SunGuard-4
The SunGuard is an economical
controller that uses the same charging circuit as the SunSaver controller.
It offers true 0-100% PWM duty cycle and setpoint accuracy to 60mV. The
SunGuard is fully encapsulated in epoxy potting and has an ABS plastic,
impact-resistant case. Five-year limited warranty.
Features:
Temperature compensation
Series
design
Lightning protected
No need to derate
Outdoor rated
Operating temperatures of -40°C to +85°C
| Model |
Voltage |
Rated PV Current
(Amps) |
Dimensions (inches) |
Weight (oz.) |
$US |
| SunGuard 4 |
12 |
4.5 |
2" X 2.5"
X 1.5" |
3 |
$27 |
Morningstar-SunLight
Features:
Sealed/flooded battery select
Temperature compensation
Parallel operation compatible
Adjustable 2-10 hours, 4 + 2, 6 + 2 or dusk to dawn
The SunLight solar lighting controller combines the SunSaver PWM battery
charging circuit with a microcontroller for automatic lighting functions.
The SunLight features a rotary switch to select among ten lighting time
options including pre-dawn settings and LVD override protection.
Detects day and night using the PV array. Five-year limited warranty.
| Model |
Voltage |
Rated PV Current
(Amps) |
Rated Load Current
(Amps) |
Dimensions (inches)
|
Weight (oz.) |
$US |
| SL 10-12 |
12 |
10 |
10 |
6" X 2.18"
X 1.32" |
9 |
$97 |
| SL 10-24 |
24 |
10 |
10 |
6" X 2.18"
X 1.32" |
9 |
$104 |
| SL 20-12 |
12 |
20 |
20 |
6" X 2.18"
X 1.32" |
9 |
$127 |
| SL 20-24 |
24 |
20 |
20 |
6" X 2.18"
X 1.32" |
9 |
$133 |
Go
to the Morningstar website
Back
to controllers
EMAIL TO ORDER $75 Minimum
E-mail:
info1@solarwares.com
|